Steam Hose Fittings
Steam hose fittings terminate steam hose assemblies safely: hose tails mounted with bolted safety clamps to EN 14420-3 / DIN 2817. Crimped ferrules are not used on steam hoses — the bolted clamp is the required attachment method. Select by DN, thread or flange connection and the steam parameters of the hose (EN ISO 6134 type 1 or 2).
Featured products
- B nut - component of GF BOSS hose ends, for rubber steam hoses
- GB hose end for rubber steam hoses, type BOSS
- Adaptor nut for hose end for steam hose, zinc-plated steel, GDB, BOSS type
- Hose tail for steam hoses with female thread, zinc-plated steel/cast iron GF BOSS
- Hose tail for steam hoses with NPT female thread, brass GF BOSS
- Hose end for steam hoses with female thread, stainless steel AISI 316 GF BOSS
- Adaptor for hose end for steam hose with female thread, zinc-plated steel, GFB, type BOSS
- Adaptor for steam hose tail with female thread, brass, GFB, BOSS type
- Adaptor for steam hose tail with female thread, stainless steel, GFB, type BOSS
- Adaptor for steam hose tail with male thread, zinc-plated steel, GMB, BOSS type
- M connector for steam hose sections, type BOSS
- Hose end for steam hose with male thread, type MS BOSS
- SBC BOSS clamp for securing hose ends for steam hoses MS and GF
- Threaded hose tail with female thread for steam hose according to EN 14423, MSS type EN
- Threaded hose end with male thread for steam hose according to EN 14423, VSS EN type
- Shell clamp for steam EN 14423 (DIN 2826) for VSS, MSS, FSS and SSF type ends
- End fitting with fixed flange FSS for steam hose according to EN 14473, stainless steel
- End fitting with fixed flange FSS for steam hose according to EN 14473, zinc-plated steel
- End with FSS swivel flange for steam hose according to EN 14423, stainless steel
- End with FSS swivel flange for steam hose according to EN 14423, galvanized steel
- Shell clamp for mounting steam hose ends, SSC
- Steam hose tail according to EN 14423 with female thread BSP, type SSF
- Steam hose tail according to EN 14423 with BSPT male thread, type SSF