Rubber bellow for compensator 115 NBR
Rubber bellows for compensator designed for use in installations where the medium consists of mineral oils, vegetable and animal fats, aerosol oils, and water with anti-corrosion additives. Note: installation of the bellows in flanges from different manufacturers does not guarantee retention of all functional properties, such as leak-tightness, which in extreme cases may result in the bellows being pulled out of the steel flanges under the internal pressure of the medium. Tubes International therefore assumes no responsibility for the consequences of such installation. It is recommended to use the bellows in flanges from the same manufacturer. If in doubt, please contact Tubes International . Inner layer: NBR rubber. Reinforcement: nylon cord. Outer layer: CR rubber. Working temperature: from -30°C to +90°C (depending on the medium).
Material: NBR - nitrile rubber
Price from 9.49 EUR (11 variants)
Request a quote or browse all variants — the full specification table is available on the page.
Variants (11)
| Part no. | Variant | Price (excl. VAT) |
|---|---|---|
| TG-115NM-032 | Rubber bellows type 115 NBR, DN32, L=130 mm | 9.49 EUR |
| TG-115NM-040 | Rubber bellows type 115 NBR, DN40, L=130 mm | 9.70 EUR |
| TG-115NM-050 | Rubber bellows type 115 NBR, DN50, L=130 mm | 11.21 EUR |
| TG-115NM-065 | Rubber bellows type 115 NBR, DN65, L=130 mm | 14.88 EUR |
| TG-115NM-080 | Rubber bellows type 115 NBR, DN80, L=130 mm | 17.25 EUR |
| TG-115NM-100 | Rubber bellows type 115 NBR, DN100, L=130 mm | 21.78 EUR |
| TG-115NM-125 | Rubber bellows type 115 NBR, DN125, L=130 mm | 34.07 EUR |
| TG-115NM-150 | Rubber bellows type 115 NBR, DN150, L=130 mm | 43.99 EUR |
| TG-115NM-200 | Rubber bellows type 115 NBR, DN200, L=130 mm | 79.25 EUR |
| TG-115NM-250 | Rubber bellows type 115 NBR, DN250, L=130 mm | 127.32 EUR |
| TG-115NM-300 | Rubber bellows type 115 NBR, DN300, L=130 mm | 107.82 EUR |