Manual shut-off valve for compressed air V3V, without end connections, SYNTESI® series
Manual shut-off valve for compressed air V3V, without end connections, SYNTESI® series, separates the working circuit from the supply air. It is a three-way, two-position, normally closed valve. In the closed position, it cuts off the supply air and vents the circuit, making it particularly suitable for service work. It features a system allowing installation of two padlocks in SY1 size or three padlocks in SY2 size, with a 3 mm shackle diameter. Alternatively, a version with a Ø 7 hole for a single padlock is available. Auxiliary connections are located on the rear and front faces of the valve (1/8” for SY1 size and 1/4” for SY2 size) for connecting a pressure gauge, pressure sensor or for additional air take-off. Size: SY1, SY2. Connection: female BSP 1/8", 1/4", front and rear. Supply pressure: up to 15 bar, depending on size. Working temperature: from -10°C to +50°C. Nominal flow…
Price from 33.20 EUR (2 variants)
Request a quote or browse all variants — the full specification table is available on the page.
Variants (2)
| Part no. | Variant | Price (excl. VAT) |
|---|---|---|
| MW-5610V100 | Manual shut-off valve V3V SY1 without end plates | 33.20 EUR |
| MW-5620V100 | Manual shut-off valve V3V SY2 without end plates | 40.40 EUR |
Related products
- Compressed air filter with pressure regulator (filter-regulator) FR, without end connections, SYNTESI® series
- Compressed air filter with AC activated carbon, without end connections, SYNTESI® series
- DEP compressed air fine filter, SYNTESI® series without end connections
- Compressed air filter FIL, SYNTESI® series without end connections
- Compressed air lubricator LUB, SYNTESI® series, without end connections
- Branching module, SYNTESI® series version 2 - road
- Branching module, SYNTESI® series, 4-way version
- Pressure reducing valve for compressed air REG, without end connections, SYNTESI® series