Hose tail, carbon steel, type SF
SF-type hose tail with flat seal, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with external steel braid. Commonly used in flexible lines for sanitary fittings, fuel systems, air systems, etc. Use UM-type nut (EC-105…). Material: carbon steel, zinc-plated.
Price from 0.88 EUR (12 variants)
Request a quote or browse all variants — the full specification table is available on the page.
Variants (12)
| Part no. | Variant | Price (excl. VAT) |
|---|---|---|
| EC-105205 | S 5 F hose tail (hose 4.5 mm) | 1.77 EUR |
| EC-105206 | S 6 F hose tail (hose 5.5 mm) | 0.96 EUR |
| EC-105208 | S 8 F hose tail (hose 7.5 mm) | 0.88 EUR |
| EC-105210 | S 10 F hose tail (hose 9.5 mm) | 0.88 EUR |
| EC-105212 | S 12 F hose tail (hose 11.5 mm) | 3.57 EUR |
| EC-105213 | S 12 F 1/2" hose tail (hose 11.5 mm) | 2.99 EUR |
| EC-105215 | S 15/22 F hose tail (hose 14.5 mm) | 4.31 EUR |
| EC-105216 | S 15 F 1/2" hose tail (hose 14.5 mm) | 3.66 EUR |
| EC-105226 | S 15/26 F hose tail (hose 14.5 mm) | 3.55 EUR |
| EC-105228 | S 18/26 hose tail F (hose 17 mm) | 3.45 EUR |
| EC-105230 | S 20 hose tail F 3/4" (hose 19.5 mm) | 3.45 EUR |
| EC-105232 | S 20 hose tail F 1" (hose 19.5 mm) | 6.02 EUR |
Related products
- Sheet-metal ferrule for crimping low-pressure hoses, carbon steel, type H
- Short sheet-metal ferrule for crimping low-pressure hoses, carbon steel, type H
- Sheet-metal ferrule for crimping low-pressure hoses, stainless steel, type H
- Hose tail, carbon steel, type S
- Nut for S and SF hose tail, carbon steel, type UM
- Straight BANJO hose end, carbon steel, type RS
- Double straight BANJO hose end, carbon steel, type DRS
- BANJO adaptor with male thread, carbon steel, type R-G