Ferrules type LDR, LD, LR, AISI 316 steel
LDR, LD, LR type ferrules are intended for crimping hygienic stainless steel hose ends (with corrugated tail) type NH-xxK-xxx and hose tails for shell clamps RS, e.g. TW-KRS-xxx, NH-xxR-xxx in industrial hoses (rubber and plastic, textile reinforced, or with reinforcing spiral - suction and delivery hoses). The ferrule should be selected taking into account the inner diameter Dw and outer diameter Dz of the hose. Ferrule length L may be slightly (a few mm) greater than the tail length Lk of the hose end. LR ferrules - only for hose tails for shell clamps, LD - only for ends with corrugated tail, LDR - ferrules for both types of ends. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Diameter D3 [mm] - lock diameter. Material: AISI 316 stainless steel.
Price from 29.75 EUR (9 variants)
Request a quote or browse all variants — the full specification table is available on the page.
Variants (9)
| Part no. | Variant | Price (excl. VAT) |
|---|---|---|
| TI-LDR-045-20-SS316 | LDR type ferrule 45 mm for hose 1.1/4", AISI 316L | 36.64 EUR |
| TI-LDR-048-20-SS316 | LDR type ferrule 48 mm for hose 1.1/4", AISI 316L | 37.40 EUR |
| TI-LDR-050-24-SS316 | LDR type ferrule 50 mm for hose 1.1/2", AISI 316L | 40.95 EUR |
| TI-LDR-053-24-SS316 | LDR type ferrule 53 mm for hose 1.1/2", AISI 316L | 50.23 EUR |
| TI-LDR-068-32-SS316 | LDR type ferrule 68 mm for hose 2", AISI 316L | 63.28 EUR |
| TI-LDR-090-40-SS316 | LDR type ferrule 90 mm for hose 2.1/2", AISI 316L | 126.77 EUR |
| TI-LDR-092-48-SS316 | LDR type ferrule 92 mm for hose 3", AISI 316L | 129.92 EUR |
| TI-LDR-107-48-SS316 | LDR type ferrule 107 mm for hose 3", AISI 316L | On request |
| TI-LR-037-16-SS316 | LR type ferrule 37 mm for hose 1", AISI 316L | 29.75 EUR |