Screw-type quick coupling socket with male NPT thread without valve, carbon steel, type HPA
HPA screw-type quick coupling socket with NPT male thread, without valve, carbon steel. The screw-type HPA socket of a hydraulic quick coupling is intended for installations with very high pressures and high mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic jacks, cutters, etc. Can be connected/disconnected when residual pressure is present in the system. Caps must be ordered separately. Material: carbon steel. Seal: NBR. Flow rate: 1/4" - 16.4 l/min; (Δp=4 bar), 3/8" - 21.3 l/min; (Δp = 4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1800 bar (socket disconnected), 3/8" - 1850 bar (socket disconnected). Working temperature: from -25°C to +100°C.
Price from 11.20 EUR (2 variants)
Request a quote or browse all variants — the full specification table is available on the page.
Variants (2)
| Part no. | Variant | Price (excl. VAT) |
|---|---|---|
| HQ-HPA06-F-04NM | HPA screw-on connector 1/4", 1/4" NPT male thread, nitrile gasket | 11.20 EUR |
| HQ-HPA10-F-06NM | HPA screw-on connector 3/8", 3/8" NPT male thread, nitrile gasket | 11.95 EUR |
Related products
- Cap for CEJN quick coupling socket series 115, 116, 117, 125, PVC
- Plug cap for CEJN quick coupling series 115, 116, 117, 125, PVC
- CEJN 115 quick coupling socket with female thread and valve, hardened steel
- CEJN 115 quick coupling socket with male thread with valve, hardened steel
- Quick coupling plug CEJN 115 with female thread and valve, hardened steel
- CEJN 115 quick coupling plug with male thread and valve, hardened steel
- CEJN 116 quick coupling female coupling with female thread, with valve, hardened steel
- CEJN 116 quick coupling socket with female thread at 90° with valve, hardened steel